Lifting Equipment Safety Tips
There are many advantages to have All lifting equipment at a factory or in an industrial area. It will perform the job of many people reducing manual labour; it can also be speedier getting the job completed and more efficient. Since it is very cost effective, one can conclude that lifting equipment is here to stay, and there will be some advantages and disadvantages accompanying the equipment if it is not used properly.
While there are many types of lifting equipment available I will focus my attention on the scissor lift, which comes in portable and heavy-duty models. The heavy-duty model is made of tempered heavy steel and must be used carefully at all times to avoid accidents and serious injury.
These are a few suggestions and pointers, which will help to make the scissor lift environment a safe one in which to work. All users should be aware of the equipment potential and capacity and should not expect it to perform outside its specified potential. The machinery came outfitted with stoppers and therefore when loading or unloading, the stoppers should be used at all times.
It is highly recommended that operators do not to use the machinery on a slope and it is preferable to park it on a hard surface base to avoid sinking or slippage. The chains and cables provided will be used to provide stability during operation. Since the machine is comprised of hydraulic equipment which is under high pressure make sure to keep all forms of excessive heat and sharp objects away from the hydraulic lines. Severing one of these lines could be fatal to any human operators or bystanders.
When loading the machine, make sure that there is plenty of space around so that its operations are not affected. It should not share a platform with another piece of equipment where the cables and chains may entangle and become dangerously hazardous.
If the machine is being towed, then it must be carried at moderate speed thus enabling it to move smoothly over bumps etc.
Another safety pointer would be to make sure that the equipment is regularly maintained as a necessity for the proper functioning of the machine. This can be translated into fewer accidents, better performance, and greater productivity.